01
How to Read GtG Ghosting Trails
Track the moving reticle across the Full Contrast, GtG Mid-Tone, and Reference lanes. A dark, smeary trail behind the target means pixel transitions are slower than your refresh window—most common on VA panels in dark 0%–25% gray transitions.
02
Fixing Inverse Ghosting (Overdrive Corona)
If you see a bright white, cyan, or negative glowing halo trailing behind the moving block, your monitor's voltage boost is set too high. Open your monitor OSD and lower Response Time / Overdrive from Extreme/Fastest down to Normal or Medium.
03
Pursuit Camera Sync Track
Switch to Pursuit Camera mode when filming your display with a smartphone or camera. Pan the camera horizontally at the exact speed of the moving target until the diagonal tick marks align vertically—this captures true perceived motion blur.
04
Verifying Overclocked Hz with Frame Skipping
Select Frame Skipping and take a photo of the screen using a 1/10s shutter speed. If all lit green squares appear consecutively with zero dark unlit gaps between them, your monitor is displaying every frame cleanly without dropping packets.
05
Testing 60Hz, 144Hz, 240Hz & 360Hz+ Panels
The top telemetry bar automatically locks onto your display's hardware V-Sync cadence (Hz and frame time in ms). Increase target speed to 1440 px/s or 1920 px/s on 240Hz–360Hz OLED and Fast-IPS panels to stress-test sub-millisecond transitions.
06
Complete Hardware Diagnostic Suite
Beyond motion clarity, use the dedicated tools below to inspect dead pixels, backlight bleed, 100% keyboard NKRO rollover & chatter, 8000Hz mouse polling rate, stereo headphone channels, and gamepad stick drift directly in your browser.